ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 is a high-strength chromium-molybdenum alloy steel double-end stud, widely adopted for flange connection solutions in oil & gas, pipeline, chemical, power and pressure vessel projects. Many global importers, engineering contractors and fastener distributors are searching for trustworthy manufacturers that can supply qualified UNC coarse thread and UNF fine thread imperial studs fully compliant with ASME B18.31.2 standards.
This alloy stud is engineered for high-pressure flange joints, balancing mechanical strength and heat resistance for continuous industrial service. It is commonly paired with A194 2H heavy hex nuts and alloy washers to build a complete bolting assembly. Multiple surface finishes can be selected to match different site anti-corrosion demands.
We have sorted out common finish options for your quick reference:
|
Surface Finish |
Suitable Environment |
Remarks |
|
Black Oxide |
Normal indoor, dry pipeline conditions |
Standard finish, low cost, easy installation |
|
PTFE Coating |
High humidity, corrosive medium |
Anti-seize, avoid thread locking |
|
Hot Dip Galvanized |
Outdoor marine, coastal projects |
Superior rust protection |
We support a wide range of custom lengths and imperial thread sizes for ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2. Both UNC coarse thread and UNF fine thread specifications are available, we can arrange stock production or bulk manufacturing according to your engineering drawings and project BOM lists. Whether you need short studs for compact flanges or extra-long studs for thick insulated joints, we can match the required dimensions.
Buyers often choose these thread types based on their project working conditions:
- UNC coarse thread: faster assembly, higher tolerance for minor dirt, widely used in general pipeline and static flange joints
- UNF fine thread: larger stress area, better resistance to loosening, preferred for vibration-intensive equipment
Before placing an order, many projects also need to confirm which grade fits their design temperature. The table below gives a quick comparison:
|
Grade |
Material |
Service Condition |
Purchasing Note |
|
A193 B7 |
Chromium-molybdenum alloy steel |
High temperature and high pressure, up to about 450°C |
Most common grade for flange bolting |
|
A193 B7M |
Chromium-molybdenum alloy steel, lower hardness |
Wet H2S / sour service environment |
Requires hardness control, NACE related projects |
|
A320 L7 |
Chromium-molybdenum alloy steel |
Low temperature service, down to about -101°C |
Used for cryogenic pipelines and LNG facilities |
We follow a strict, full-process inspection flow for all B7 stud bolts. Raw material incoming inspection is the first checkpoint to verify chemical composition and material certification. After heat treatment and thread machining, our QC team inspects thread profile, overall length, shank diameter and surface condition one by one. Finished goods will go through random sampling for tensile strength mechanical tests. Official MTR material test reports can be issued upon request for your project submission and audit.
The key acceptance criteria for this grade stud bolt are listed below:
- Material grade strictly conforms to ASTM A193 B7
- Heat treatment meets the specified hardness range
- Tensile test result meets the minimum load requirement
- Thread dimension complies with ASME B18.31.2
ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 is designed to work under high-temperature and high-pressure operating environments. It is the preferred fastener choice for pipeline flanges, industrial valves, pressure vessels, heat exchangers and other petrochemical equipment. It provides consistent clamping force to keep flange connections sealed and prevent medium leakage under long-term service.
All inspected and qualified studs are carefully bundled and packed to fully protect precision threads against scratches, denting and contamination during long-distance sea transportation. We provide standard export packing for ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 in assorted lengths. Custom shipping marks, product labels and detailed packing lists are supported for distributors, container bulk orders and project shipments.
We are a professional fastener manufacturer with years of focused experience in producing ASTM A193 B7 stud bolts and other pressure-class bolting components. We accept small sample trial orders as well as large-volume container orders with flexible MOQ. Our experienced sales and technical team provides fast, clear quotations and timely technical support. We maintain close communication throughout the whole process, from sample confirmation, production scheduling to final delivery, to help you lower sourcing risks.
Our convenient order service items include:
- Sample supply for lab testing and project approval
- Custom marking and batch traceability
- Co-packing with matched nuts and washers as one set
- Support third-party inspection before shipment
1. Can you provide MTR for ASTM A193 B7 stud bolts?
Yes, official material test reports (MTR) are available for every batch of products.
2. Do you supply both UNC and UNF thread types?
Both UNC coarse thread and UNF fine thread imperial specifications are available for production.
3. What surface finishes can you offer?
Black oxide is standard; PTFE coating and hot dip galvanized finishes are optional on request.
4. What is the lead time for bulk orders?
Normal lead time depends on quantity and specifications, we will confirm the schedule after order confirmation.
5. Can you support third-party inspection?
Yes, we accept third-party inspection before shipment as required by your project.