What are the features of Hex Bolt Grade 5 UNC & UNF ASME B18.2.1 Carbon Steel?

● 2026-11-17 ● - ● Leave me a message

For sourcing engineers, procurement managers and project buyers in North America, choosing the right inch-series fastener is critical to avoid assembly delays, rework and unexpected field failures. Hex Bolt Grade 5 UNC & UNF ASME B18.2.1 Carbon Steel remains one of the most widely specified carbon steel fasteners across industrial supply chains. It is produced from medium carbon steel and processed through strict quenching and tempering heat treatment, delivering stable, predictable mechanical performance for medium-load fastening jobs. This product follows unified American fastener standards, so it is highly interchangeable and easy to source for machinery retrofits, new fabrication and routine maintenance.

Hex Bolt Grade 5 UNC & UNF ASME B18.2.1 Carbon Steel

Core technical features

- Dual thread options: UNC coarse thread enables fast installation and better tolerance to minor alignment errors, while UNF fine thread delivers stronger anti-loosening performance under vibration and supports precise adjustment.

- Standardized dimension: Fully compliant with ASME B18.2.1, tight thread and dimensional tolerances ensure smooth matching with matched nuts for Hex Bolt Grade 5 UNC & UNF ASME B18.2.1 Carbon Steel.

- Clear grade marking: Three radial lines on the bolt head for easy Grade 5 identification during QC inspection.

- Consistent mechanical property: Controlled heat treatment process reduces performance deviation between batches.

Item
Specification
Material
Medium carbon steel (A108 / 1035)
Governing Standards
ASME B18.2.1, SAE J429
Thread Series
UNC (Coarse), UNF (Fine)
Thread Class
2A (commercial, removable fit)
Head Style
Hex bolt head
Thread Form
60° unified thread profile
Screw End
30° chamfered end
When you compare fastener options for your bill of materials, thread class is a detail that many buyers overlook. The Class 2A thread used on this Hex Bolt Grade 5 UNC & UNF ASME B18.2.1 Carbon Steel is the industry standard for removable field assembly. It balances reasonable manufacturing cost and reliable interchangeability, so your fitters can assemble and disassemble components without seizing or thread damage. This tolerance grade is suitable for nearly all general industrial applications, unlike tighter specialty grades that are reserved for aerospace or precision medical equipment. Confirming standard thread specifications upfront helps you prevent costly mistakes when cross-referencing alternate suppliers.

Hex Bolt Grade 5 UNC & UNF ASME B18.2.1 Carbon Steel

Load & performance reference

Load ratings are the core reference for buyers to judge whether a fastener matches their project design. Please note that published tensile values are laboratory test results. Real working load will change based on installation torque, grip length, surface treatment and the hardness of the base material you are fastening. As a standard procurement practice, engineering teams should always add a safety factor and never design assemblies around the ultimate tensile strength alone.

Parameter
Reference Value
Notes
Minimum Tensile Strength (1/4"–1")
120 ksi
For standard sized range
Minimum Tensile Strength (1-1/8"–1-1/2")
105 ksi
Larger diameter reduction
Minimum Yield Strength
92 ksi
Permanent deformation threshold
Hardness
HRC 24 – 32
After quenching & tempering
Elongation
Min 14%
Good toughness against shock load
Grade Marking
3 equally spaced radial dashes
Located on top of hex head
Tensile load test for Hex Bolt Grade 5 UNC UNF ASME B18.2.1 carbon steel

Recommended application scenarios

This Grade 5 hex bolt is engineered for medium-load fastening requirements. It is commonly specified for agricultural machinery, heavy-duty centrifugal pumps, power transmission assemblies, light steel frames and general industrial fixtures. It is important for procurement teams to communicate with your design team: this grade is not suitable for critical high-load safety connections, where Grade 8 fasteners should be selected instead. Many experienced buyers will ask their suppliers to provide material test records before approving large bulk orders, especially for long-term framework contracts.

Thread selection guidance

When selecting between UNC and UNF, you can judge according to vibration intensity, assembly speed and load requirements.

- Choose UNC coarse thread if you need quick assembly and easy on-site fitting.

- Choose UNF fine thread for equipment working under continuous vibration, such as motor brackets.

For bulk purchasing, thread type selection also impacts your stocking plan. UNC is usually more universally available and easier to source for urgent spot orders. UNF is preferred for vibration-prone equipment, though matching nuts and lock accessories may have longer lead times. Clarifying thread requirements early in your RFQ will help suppliers quote accurately and avoid shipment errors. This Hex Bolt Grade 5 UNC & UNF ASME B18.2.1 Carbon Steel provides a cost-effective and reliable fastening solution for most medium-load industrial projects.

Quality control and packaging

Consistent quality and export-friendly packaging are key concerns for buyers placing container orders. Every batch of Hex Bolt Grade 5 UNC & UNF ASME B18.2.1 Carbon Steel is inspected with multi-step checks: visual appearance screening, thread gauge verification and random hardness sampling. We can pack goods in standard export cartons and palletize for ocean shipment to reduce collision damage during transit. Custom carton labels, packing lists and private branding are supported if you handle distribution for your own customers.

Export carton packing of Grade 5 hex bolt before shipment

FAQ

Q1: What does the three radial marks on the bolt head mean?

A1: The three evenly spaced radial lines are the standard identification mark of Grade 5 hex bolts, which helps inspectors quickly confirm the strength grade.


Q2: Can UNC and UNF threads be used interchangeably?

A2: No. UNC and UNF differ in thread pitch, they cannot be matched with the same nut.


Q3: What is the minimum tensile strength of Grade 5 hex bolts?

A3: For sizes 1/4" to 1", the minimum tensile strength reaches 120 ksi; for 1-1/8" to 1-1/2", it is 105 ksi.


Q4: Is custom length available for this hex bolt?

A4: Yes, we support various custom lengths as per your drawing and order requirements.


Q5: What test reports can you provide?

A5: We can provide mill test reports to verify material composition and mechanical properties.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy