ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2
  • ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2
  • ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2
  • ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2

ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2

ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 is high-strength Cr-Mo alloy steel double end stud for high temp and pressure service. It features UNC and UNF imperial threads, suitable for flange and pressure vessel connections. Black oxide, zinc plating and hot dip galvanized treatments are available.

    Send Inquiry

    Product Description

    ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 is a popular alloy steel stud for high-pressure flange connections. Made of Cr-Mo alloy steel with quenching and tempering treatment, this double-end stud maintains stable clamping force under continuous high temperature and high pressure. It complies with ASME B18.31.2 standard and supports both UNC coarse and UNF fine imperial threads. Normally matched with A194 2H heavy hex nuts to form a complete flange fastening set.

    ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 stud bolt with A194 2H nuts and washers

    Material & Thread Specification

    Item
    Details
    Grade
    ASTM A193 B7
    Raw Material
    Chromium-molybdenum alloy steel
    Thread Standard
    UNC, UNF imperial thread
    Standard
    ASME B18.31.2
    Available Sizes
    1/4” to 4”
    Max Continuous Working Temperature
    450°C
    Surface Treatment Options
    Black oxide, zinc plating, hot dip galvanized, PTFE coating
    Material test certificates are available for this fastener. Each heat lot is traceable, which meets document requirements for oil, gas and petrochemical projects. You can choose UNC coarse threads for fast installation, or UNF fine threads for higher preload and better anti-vibration performance.

    Key Advantages

    - Good heat resistance: B7 alloy will not easily soften at high temperatures, avoiding loose joints in hot piping systems

    - Rolled threads: Rolled threads offer better fatigue strength than cut threads, suitable for working conditions with cyclic pressure changes

    - Multiple anti-corrosion choices: Different surface finishes fit dry indoor, coastal and corrosive chemical environments

    - Full batch traceability: We can provide raw material test reports for every batch to support project inspection and audit

    This grade is not for ordinary light assembly. It is designed for critical applications where joint failure will cause serious safety risks.

    ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 double end stud bolt dimension drawing

    Main Application Industries

    ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 is the standard fastener for flange connections in energy and process industries. It is widely used on pressure vessels, steam boilers, pipeline flanges, valve bodies and heat exchangers. Engineers select this stud bolt for onshore refineries, power plants and offshore platform piping systems.

    Surface Finish Selection Guide

    Surface Finish
    Main Feature
    Recommended Application
    Black Oxide
    Low friction, thin coating, no impact on thread fit
    High-temperature dry internal piping
    Electro Zinc Plated
    Moderate anti-corrosion performance, cost-effective
    Indoor petrochemical auxiliary equipment
    Hot Dip Galvanized
    Thick zinc layer, excellent outdoor corrosion protection
    Open pipe racks and coastal facilities
    PTFE Coating
    Anti-galling, prevents thread seizure during repeated disassembly
    High-pressure flange joints requiring regular maintenance
    Coating thickness will affect thread fit. If you select hot dip galvanized or PTFE coating, we can adjust thread tolerance to ensure smooth nut threading.

    ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 tensile test for B7 stud bolt

    Quality Control for Alloy Stud Bolts

    Alloy fasteners require stricter inspection standards than ordinary fasteners. Before production, we check raw material chemical composition to confirm it meets A193 B7 requirements. After heat treatment, samples are tested for hardness and tensile strength. Finished studs are checked for straightness, thread profile and dimensional accuracy. Orders can only be shipped after all tests pass. MTC certificates can be issued upon request.

    ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 goes through this full inspection process to guarantee consistent quality for your industrial projects.

    Packaging & Shipment

    We use special packaging for ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 to protect threads from damage during sea freight. Studs are separated to avoid thread scratching, packed into sturdy export cartons and loaded on wooden pallets for container shipment. Custom labels, packing lists and private branding are supported for distributors.

    ASTM A193 B7 Stud Bolt UNC & UNF ASME B18.31.2 assorted B7 stud bolts


    Why Buy A193 B7 Stud Bolts from Gangtong Zheli

    We specialize in high-grade alloy fasteners for pressure boundary applications, serving engineering contractors and global fastener distributors. We accept small sample orders and full container bulk orders for UNC and UNF B7 studs. Our technical team helps you select thread types and surface finishes, and prepares documents for third-party inspection. We offer clear pricing and reliable lead time, helping you arrange procurement smoothly without unexpected delays.

    FAQ

    1. What nuts match A193 B7 stud bolts?

    Matching nuts are ASTM A194 2H heavy hex nuts.

    2. What is the difference between UNC and UNF threads?

    UNC is coarse thread for quick assembly; UNF fine thread provides higher preload and better anti-vibration performance.

    3. Can you supply PTFE coated A193 B7 studs?

    Yes, PTFE coated studs are available to prevent thread galling.

    4. Can I get samples for testing?

    Samples are available for lab testing, buyer pays courier cost.

    5. Can you make custom non-standard lengths?

    Custom lengths are acceptable. Send your drawing for quotation and lead time.

    Related Products
    Send Inquiry
    Please feel free to fill your inquiry in the form below. We will reply you in 24 hours.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy