Our ASME B18.3 Inch Series Socket Head Cap Screws, also known as UNC Allen cap screws, are fully manufactured to meet the ASME B18.3 imperial standard. Unlike metric DIN 912 socket head cap screws, this range follows inch dimensions with UNC coarse threads. They are widely specified for North American machinery, molds, automation equipment and precision assembly. We support sample orders, mixed-size lots and full bulk shipments, and can supply EN 10204 3.1 material test certificates for your audit needs.
Many purchasing teams and engineers mix up these inch fasteners with metric DIN 912 screws. Even with a similar head profile, thread pitch, head height, socket depth and tolerance rules are entirely separate. Using the wrong fastener can lead to thread stripping, fit issues and long-term safety risks for your finished equipment. Confirming the ASME B18.3 Inch Series Socket Head Cap Screws standard at the sourcing stage helps you avoid costly rework later.
|
Item |
Details |
|
Standard |
ASME B18.3 |
|
Product Name |
Socket Head Cap Screw |
|
Series |
Inch Series |
|
Thread |
UNC Coarse Thread |
|
Available Material |
A574 Alloy Steel, A2 Stainless Steel, A4 Stainless Steel |
|
Surface Treatment |
Black Oxide, Zinc Plated, Custom finishes on request |
|
Mechanical |
Property High tensile strength after heat treatment |
|
Document |
EN 10204 3.1 MTC |
|
Working Condition |
Recommended Material & Surface |
|
Molds, heavy-load precision equipment |
A574 Alloy Steel, Black Oxide |
|
Marine, outdoor, corrosive environments |
A4 Stainless Steel |
|
General indoor assembly |
A2 Stainless Steel or zinc‑plated alloy steel |
Precise dimensional tolerance compliant with ASME B18.3 inch standard
Consistent mechanical performance via professional heat treatment
Broad range of standard UNC inch sizes in stock
Flexible surface treatment to match your application
Valid 3.1 inspection certificate available
One‑stop fastener supply for ASME, DIN and ISO standard parts
These benefits come from our controlled, repeatable production workflow. We inspect raw materials, forge parts, roll threads, apply heat treatment and complete finishing in-house. This setup reduces the inconsistent hardness and dimensional drift commonly seen with smaller, non-specialized suppliers. Every batch of ASME B18.3 Inch Series Socket Head Cap Screws goes through full dimension and mechanical inspection before release.
We maintain dedicated production lines for imperial standard fasteners and stock the most frequently ordered UNC sizes under ASME B18.3. If your drawings follow North American imperial standards, we help cut down back-and-forth clarification caused by mismatched metric and inch specifications.
We keep flexible scheduling to fit your procurement cycle. Whether you need a small trial batch to validate quality or container volumes for ongoing projects, our sales and production teams can arrange accordingly. Since we carry a full fastener portfolio, you can combine bolts, nuts and washers into a single order to reduce shipping overhead and simplify your vendor management.
Ideal for precision molds, automated machinery, industrial equipment, North American standard engineering projects, jigs and fixtures, and other assemblies requiring inch‑size high‑strength Allen screws.
Engineers often select this style because the cylindrical head fits neatly into counterbored holes. This low-profile design saves valuable space and leaves a flush surface, which is essential for precision assemblies where protruding fastener heads cannot be accepted. When you place an order for ASME B18.3 Inch Series Socket Head Cap Screws, our team will confirm your application load to recommend the most suitable material and coating.
1. Thread note: ASME B18.3 socket head cap screws use UNC coarse thread by default.
2. Confirm material, strength grade and surface finish before quotation.
3. We strongly suggest sample verification before mass production for critical load applications.
4. Mixed sizes, small trial orders and full container bulk supply are acceptable.
5. Notify us in advance if you require 3.1 MTC for inspection.
Sharing complete requirements early helps us quote accurately and prevent order delays. If your drawings include special marking rules, packaging instructions or third-party inspection requirements, send those details to our sales team upfront. We will pass all requirements to the workshop and QC team before production starts.
We use export-grade packaging suitable for ocean transit. Standard options include woven bags, cartons and pallets, configured to protect threads and prevent rust during long-distance shipping. Outer carton markings can be customized with your part numbers, standard references, quantities and batch codes to match your receiving and warehousing process.
Lead time depends on stock availability and order volume. Commonly stocked sizes can ship quickly, while non-stock custom lengths require dedicated production time. Once your order is confirmed, our sales contact will lock in the timeline and keep you updated on production progress.
1. What is the main difference between ASME B18.3 and DIN 912?
ASME B18.3 follows imperial inch dimensions with UNC threads, while DIN 912 is a metric standard. They are not directly interchangeable.
2. Do you supply stainless steel ASME B18.3 socket head cap screws?
Yes, we offer both A2 and A4 stainless steel grades.
3. Can you provide EN 10204 3.1 certificates?
Yes, we can issue 3.1 material test certificates upon request.
4. Must A574 screws be black oxide finished?
No. Black oxide is the most common option, though zinc plating is also available.
5. Can you make custom lengths?
Custom lengths are supported, as long as they fall within the standard dimensional scope of ASME B18.3