ASME B18.3 Socket Head Cap Screw Inch Series
  • ASME B18.3 Socket Head Cap Screw Inch Series ASME B18.3 Socket Head Cap Screw Inch Series
  • ASME B18.3 Socket Head Cap Screw Inch Series ASME B18.3 Socket Head Cap Screw Inch Series
  • ASME B18.3 Socket Head Cap Screw Inch Series ASME B18.3 Socket Head Cap Screw Inch Series

ASME B18.3 Socket Head Cap Screw Inch Series

ASME B18.3 Socket Head Cap Screw Inch Series is a high-strength inch machine screw with inner hex drive. It follows ASME B18.3 standard, supports UNC and UNF threads, supplied in A574 alloy steel and stainless steel, ideal for molds, automation and mechanical assembly.

    Send Inquiry

    Product Description

    The ASME B18.3 Socket Head Cap Screw Inch Series is a widely adopted high-strength inch‑series machine screw, also known as SHCS. It features an internal hex drive, which allows installation in narrow or recessed positions where standard wrenches cannot reach. Manufactured strictly following the ASME B18.3 standard, this fastener supports UNC and UNF inch threads, with stable dimensional interchangeability for North American equipment, molds and automation assemblies.

    ASME B18.3 Socket Head Cap Screw Inch Series

    Core Specification

    Item
    Details
    Standard
    ASME B18.3
    Thread Type
    UNC / UNF inch thread
    Drive Type
    Hex socket drive
    Common Material
    ASTM A574 alloy steel, A2 / A4 stainless steel
    Surface Treatment
    Black oxide, clear zinc plating, natural stainless finish
    Tolerance
    Controlled per ASME B18.3 requirements
    The specification table above lists fundamental parameters for your sourcing reference. Inch-series fasteners have independent thread systems, which is the key reason they cannot be swapped casually with metric fasteners. Even if the nominal diameter is close, the tooth pitch and thread profile remain different, so confirmation of drawing requirements is essential before placing orders.

    Dimension drawing of ASME B18.3 Socket Head Cap Screw Inch Series


    Key Advantages

    This inch socket head cap screw delivers high tensile strength, making it suitable for heavy‑load fastening scenarios. The cylindrical cap head saves lateral space, while the inner hex drive offers large torque transfer without slipping.

    When you source for North American replacement parts, the ASME B18.3 Socket Head Cap Screw Inch Series matches legacy machinery and aftermarket spare parts perfectly. Strict thread inspection by go/no‑go gauges ensures smooth assembly and avoids jamming during installation. Multiple surface treatments are available to meet different anti‑corrosion demands.

    Material & Finish Reference

    Working environments vary greatly across industries, so surface treatment and material selection are core factors affecting the whole service life of fasteners. Humidity, salt spray and chemical erosion will accelerate aging, so buyers need to combine on-site working conditions to make a proper selection.

    Material & Finish
    Performance Feature
    Recommended Use
    ASTM A574 Alloy Steel + Black Oxide
    High tensile strength, moderate rust resistance
    Molds, power transmission, industrial machinery
    Carbon Steel, Clear Zinc Plated
    Economical, basic anti‑rust protection
    Indoor general assembly, dry working condition
    304 Stainless Steel (A2)
    Good corrosion resistance
    Humid environment, food machinery
    316 Stainless Steel (A4)
    Excellent salt & chemical resistance
    Coastal, marine and chemical equipment

    Application Scenarios

    Engineers often pick the ASME B18.3 Socket Head Cap Screw Inch Series for compact and high‑strength joints. Typical applications include:

    - Injection molds and die‑casting tooling

    - Automation equipment and robotic modules

    - Pump, valve and compressor assemblies

    - North American standard machinery maintenance

    - Precision fixture and tooling assembly

    The demand for inch fasteners stays steady as a large number of old North American production lines and imported equipment still run in factories worldwide. Many maintenance teams keep stable replenishment orders for these standard socket cap screws.

    Installation Guidance

    - Use a matched hex allen key to apply torque; avoid over‑torquing to prevent head breakage or thread stripping.

    - Keep threaded holes clean, free of burrs, debris and paint residue before fastening.

    - For stainless steel variants, use anti‑seize compound to reduce the risk of thread galling under repeated disassembly.

    - Confirm thread type (UNC or UNF) before ordering, they are not interchangeable.

    Quality Control

    Every batch of the ASME B18.3 Socket Head Cap Screw Inch Series we supply goes through full inspection. We check dimensions, thread fit, hardness, surface condition and coating quality. Material test certificates and dimension inspection reports can be provided upon request, to help buyers lower production and on‑site failure risks.

    Rigorous inspection runs through the whole production flow, from raw material incoming check, thread rolling, heat treatment to final sorting and packaging. We keep batch records traceable for every shipment.

    Hardness testing equipment for ASME B18.3 Socket Head Cap Screw, GTZL laboratory

    Why Choose GTZL

    GTZL (Gangtong Zheli) is your reliable supplier for standard inch fasteners. We have rich manufacturing experience for the ASME B18.3 Socket Head Cap Screw Inch Series, with stable raw material channels and complete in-house testing procedures. We support customized packaging, client-specified labels, flexible delivery and FOB shipment from Ningbo port. Our sales team provides quick response and professional technical support for overseas long-term buyers.

    Packaging & Shipment

    Standard packing: bulk packed into sturdy export cartons, and all cartons will be neatly stacked and fixed on standard EUR pallets to avoid shifting or damage during transit. We support fully customized labels and markings, which will be produced strictly in accordance with the label samples provided by the client. We are able to arrange shipment departing from Ningbo port on FOB basis, and we can coordinate the loading schedule to match your preferred vessel and cut-off time.

    GTZL warehouse for inch fasteners

    FAQ

    Q1: Can these replace metric socket head cap screws?

    A: No. Inch UNC/UNF thread pitch and outer diameter differ from metric M screws. They cannot be directly interchanged, even if the size looks similar.


    Q2: What does SHCS stand for?

    A: SHCS is the short name for Socket Head Cap Screw, widely used by overseas procurement and engineering teams.


    Q3: Can you supply mixed finishes and mixed sizes in one order?

    A: Yes. We accept mixed‑size and mixed‑coating orders for project customers.


    Q4: What is the difference between UNC and UNF thread?

    A: UNC is coarse thread with fewer threads per inch for fast assembly. UNF is fine thread, offering better locking performance and suitable for vibration working conditions.


    Q5: Can you provide test reports and material certificates?

    A: Sure. Material test certificates, hardness reports and dimension inspection documents can be provided upon your formal request.

    Related Products
    Send Inquiry
    Please feel free to fill your inquiry in the form below. We will reply you in 24 hours.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy